DAKINE Binding Hardware for Snowboards
- 8 14-mm screws [NOTE: Dakine sells these as 14 mm but we measure them to be 16 mm screws.]
- 8 Countersunk washers
- Fits most bindings
- Use caliper and depth gauge for determining proper screw lengths.
- IMPORTANT NOTE: We can't guarantee the best match for your bindings/board. Measure your existing screws (from top of screw to bottom) and pick the best length for your bindings. We sell 16, 14, and 12 mm. Adult boards usually use 14-16 mm screws.