Side and base edge bevel multi tool with a full set of five DMT diamond stones AND includes a file.
- This one tool is all you need to sharpen and bevel your edges. Dial a precise angle from 0 degree to 5 degrees in 0.5 degree increments.
- Five diamond stones included!
- Use the gray for serious repairs and removal, black for cutting, the blue to maintain the sharpness and the red green to fine sharpen and polish.
The amount of base edge bevel will affect the ability of the ski/board to pivot on the snow. The more base edge bevel, the easier it will be to pivot or slide from side to side. Once you set the base edge angle, you can't go back to the original because of the base material. If the skis hook up on turns, increase the bevel by a quarter or half degree.
Side edge beveling will give the skis more grip on the snow surface. Higher angles should be reserved for experienced racers; if the angle is too high the ski can "rail out" on a less experienced racer. Typical angles are 1.0 to 3.0 degrees. Less angle equals less grip. Slalom angles can be 3.0 to 5.0 degrees; downhill up to 3.0 degrees. A racer should start at 3 degrees. Keep in mind:
- Higher angles are quicker to dull.
- An aggressive edge (high angle), may be more difficult for lighter racers (young kids or women) may make it more difficult to recover from being up on the edge.
