100% Fluoro Microfiber, 7 gram shaker.
- Fluoro microfibers are a new physical form of fluoro; they are light, fluffy and fibrous.
- Racewax was the first company to introduce this high-speed fluoro overlay.
- It is incredible in very cold weather, below 23 F or -5 C and suggested for new snow at higher temperatures.
Applying Powder and Fiber Overlays
- Sprinkle an even layer of powder or microfiber overlay on the base.
- Spread it evenly with a cork (lightly).
- Work the powder/fiber into the base with a cork in stages. Increase the pressure in each stage.
- In the last stage, use sufficient pressure so as to generate heat.
- Brush out excess fluoro:
- Use 10 firm strokes of the nylon brush to remove excess overlay.
- Use 10 firm strokes of the horsehair brush to remove excess overlay further.
- If you use the horsehair brush for overlays, it is recommended that you use it exclusively for this, and not use it for other purposes.
