see details
Base-Side Bevel File Guide Ski Edge Tool +5 DMT diamond stones + file

Base-Side Bevel File Guide Ski Edge Tool +5 DMT diamond stones + file


$67.99 & Free shipping over $50
Retail: $141.73 (You save $73.74)
10% off storewide summer sale code: 10p SEE DETAILS


We care about our customers. Please contact us if you have any questions during your shopping experience.

CALL 888-475-4929 SEND US AN EMAIL
Item Description Arrow


Side and base edge bevel multi tool with a full set of five DMT diamond stones AND includes a file.

  • This one tool is all you need to sharpen and bevel your edges. Dial a precise angle from 0 degree to 5 degrees in 0.5 degree increments.
  • Five diamond stones included!
  • Use the gray for serious repairs and removal, black for cutting, the blue to maintain the sharpness and the red/green to fine sharpen and polish. Use wet.
  • Bonus Benefit for this tool: If you don't know what base and side angles your ski/board are set to, this tool can help you find them. Before you start mark the metal edge with a sharpie, start the tool at the lowest angle and see if it removes the marking on your edge. Raise the angle step-wise and repeat until it removes the mark. That is your angle! Record the base/side angles for future reference.

Grit guide:

  • GREY (XX-Coarse)= offers serious metal removal in the shortest time (120 grit);
  • BLACK (X-Coarse)= offers best cutting action (220 grit);
  • BLUE (Coarse)= for routine edge maintenance and sharpening (325);
  • RED (Fine)= for deburring and edge polishing (600);
  • GREEN (X-fine)= for ultra smooth edge polishing (1200)

The amount of base edge bevel will affect the ability of the ski/board to pivot on the snow. The more base edge bevel, the easier it will be to pivot or slide from side to side. Once you set the base edge angle, you can't go back to the original because of the base material. If the skis hook up on turns, increase the bevel by a quarter or half degree.

Side edge beveling will give the skis more grip on the snow surface. Higher angles should be reserved for experienced racers; if the angle is too high the ski can "rail out" on a less experienced racer. Typical angles are 1.0 to 3.0 degrees. Less angle equals less grip. Slalom angles can be 3.0 to 5.0 degrees; downhill up to 3.0 degrees. A racer should start at 3 degrees. Keep in mind:

  • Higher angles are quicker to dull.
  • An aggressive edge (high angle), may be more difficult for lighter racers (young kids or women) may make it more difficult to recover from being up on the edge.
Specifications Arrow


Product Use Arrow

Product Use



There are no reviews for this product at this time.

Write a Review


Sign up for the newsletter to receive exclusive discounts on wax and tools, information on new products, and advanced tuning tips.

Facebook Twitter