Burton-style Binding Hardware for Snowboards
- 8 6x14-mm screws [NOTE: These are true 14 mm screws; Dakine screws advertised as 14 mm are actually longer.]
- 8 Countersunk washers
- Fits larger (e.g., adult) bindings that have a thicker base.
- IMPORTANT NOTE: We can't guarantee the best match for your bindings/board. Measure your existing screws (from top of screw to bottom) and pick the best length for your bindings. We sell 16, 14, and 12 mm. Adult boards usually use 14-16 mm screws.
*WARNING: Too long a screw could penetrate into the snowboard base. If in doubt buy more than one length to be safe. Use caliper and depth gauge for determining proper screw lengths.
There are no reviews for this product at this time.Write a Review