Item Description 
Description
RaceWax Wide Ski 150 mm Roto Brush Brass
- 150 mm
- Perfect for wider Alpine skis.
- Use the brass brush for before-wax base cleaning or for very hard waxes. Use in a tail-to-tip direction for base structure renewal and pore opening for better wax absorption.
- See Product Use tab below or Tuning Tips section for instructions.
- OK to use two 150 mm brass brushes together on a 300 mm axle for snowboards.
Don't use excessive drill speeds or downward pressure. This will create excessive heat and smear wax rather than brush it. Most cordless drills max out at 1,200 rpm, but standard drills go up to 2,500 rpm. Use the sound of the drill to judge the speed. Most of the brushing action is back and forth with a tip to tail finish.
- Always use safety glasses.
- (Except for brass) Brush from tip to tail with the brush rotation throwing the wax particles towards the tail.
- Brass or Copper Roto-Brush: Use tail to tip at a medium pace with light pressure at 800 rpm.
- Nylon Roto-Brush: Use back and forth at a medium pace with medium pressure at top speed not-to-exceed 2,500 rpm, with two final strokes tip to tail.
- Soft Bristle or Felt Roto-Brush: Use back and forth at a medium pace with light pressure at top speed not-to-exceed 2,500 rpm, with two final strokes tip to tail.
- Horsehair Roto-Brush: Use back and forth at a medium pace with light pressure at top speed not-to-exceed 2,500 rpm, with two final strokes tip to tail.
- Roto-Cork: Use back and forth at a quick pace with very light pressure at 800 rpm, finish with hand corking. Due to the extreme heat generated by friction minimize the time the cork is in contact with the base.
Specifications
Specifications
Product Use
