Item Description 
Description
P-Tex Rods for base repairs.
- 5 clear ptex rods; 5 black ptex rods
- 8 mm diameter. About 190 mm long (7.5 inches) long.
Metal base scraper.
- Use this for P-Tex work on ski and snowboard bases.
- Suitable for light base planing.
- Vinyl storage sleeve for metal scraper included.
3M Brand Base Buffing/Treatment Fibertex/Scotchbrite Pads (4.5 in x 6 in) for buffing base after repair.
- 1 Medium (Maroon)
- 1 Fine (Gray)
- 1 Non-abrasive (White) large non-woven nylon impregnated with ultra-fine abrasive
Metal Grip Ski Snowboard Base Bonding Material: Allows base material to adhere to the ski edges and core, offering a much better bond than co-polymer. Metal grip is designed to fill up half the repair area that is against the ski core or edge. Once metal grip has been applied, standard p-tex base repair material is laid over it for a finished repair. Metal grip will work for repairs where a base patch has been the traditional method, decreasing the work time significantly. A chisel tip soldering iron (found at tool and hardware stores) is recommended to melt metal grip into the base.
- One, 1 foot rope of Black Metal Grip
- One, 1 foot rope of Clear Metal Grip
Specifications
Specifications
Product Use
Product Use
Reviews
ACCESSORIES
